Inquiry
Sign In
日本語- Technical Information
- Controllers Matrix
Controllers Matrix
Controllers used for RP Series (Stepping Motor) and Metered Discharge Pumps
We have a wide selection of controllers and monitors for select tubing pumps. Please refer to the table below and select a controller depending on your pump type and the number of connections. Please feel free to contact us for more information and help choose the correct controller to tailor the operation to your specific needs.
| Number | Part Number (Controller) |
Type of Controller |
Compatible Pumps | Maximum Pump Connections to Main Controller |
Maximum Connectable # of Secondary Controllers |
Maximum Pump Connections per System*1 |
Pump without Connector | Pump with Connector | USB Included*2 | PC Requirement | Remarks |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
RE-C100 | Primary Controller |
RP-HX / TX Series |
RP-HX: 1 RP-TX: 2 *3 |
- | - | Connectable | Not Connectable |
- | - | - |
 |
RE-F100 | Frequency Counter |
|||||||||
 |
RE-C200 | Primary Controller |
RP-HX / TX / QⅡB / QⅢB / QⅡC / QⅢC Series(Series can be mixed) | 1 | 2 | 9 | Connectable | Not Connectable |
Included | Required | - |
 |
RE-C201 | Secondary Controller |
4 *4 |
- | |||||||
 |
RE-C300 | - | RP-MC / HC / HⅡC / KⅡC Series | 1 | - | - | Not Connectable |
Connectable | Included | Required | Exclusively for Fixed Discharge Pumps |
 |
RE-C500 | Primary Controller |
RP-HX / TX / QⅡB / QⅢB / QⅡC / QⅢC Series(Series can be mixed) | 6 *4 |
1 | 12 | Not Connectable |
Connectable | Included | Optional *5 |
- |
 |
RE-C501 | Secondary Controller |
- | ||||||||
 |
RE-C600 | - | RP-HX / TX / QⅡB / QⅢB / QⅡC / QⅢC Series | 1 | - | - | Connectable | Connectable | Included | Optional *5 |
Control the # of Revolutions *6 |
 |
RE-C602 | - | RP-QⅡF / QⅢF Series | 1 | - | - | Connectable | Connectable | Included | Optional *5 |
Control the # of Revolutions *6 |
 |
RE-C700 | - | RP-H Series | 1 | - | - | Connectable | Connectable | Included | Optional*5 | Control the # of Revolutions *6 |
Note: Details such as specifications, etc., may be changed without notice.
*1: Maximum connectable pumps are the total pumps connectable to the main controller and the secondary controller(s).
*2: The USB drive contains software for PC.
*3: When RP-TX is connected, the two pumps will operate in the same way.
*4: Pumps can be controlled individually.
*5: A PC is required until the operation sequence program data is saved on the controller.
When changing the operation sequence of the pump, connect it to the PC again to reconfigure the sequence.
*6: The pump can be stopped at a specified number of revolutions (up to 30 revolutions). In addition, fixed volume dispensing at a specified multiples of single dispensing volume per revolution is possible (Single Mode).
*: Controllers and pumps are products of Aquatech Co., Ltd.