Pinch Valve - PM Series
The PM series is a solenoid pinch valve which supports a wide range of tubing materials such as silicone, PharMed®, and Tygon®. This pinch valve can be freely used as an NC/NO type with a single tube or as a Dual type with two tubes. It can also be configured as a 3-way valve by using a Y-shaped fitting.
Swipe left to see the remaining contents
|Tubing Inner Diameter（mm）||0.8 - 1.6 mm|
|Tubing Outer Diameter（mm）||2.4 - 3.2 mm|
|Tubing Material||Silicone, Pharmed®, Tygon®|
|Type||2-way NC, 2-way NO, or 3-way|
|Operating Pressure Range||
|Rated Voltage||12, 24, or 90 VDC|
|Power Consumption||4.4 W|
|Outer Dimensions||26 x 40 x 60 mm|
|Ambient Temperature Range||0～50 ℃|
Note: Specifications etc. may be changed at any time without notice.