The FLOW THROUGH design manifold effectively prevents contamination when several samples are injected in a common line of flow. The figure on the left shows a conventional manifold, while the right shows the FLOW THROUGH design. ① The buffer (blue area) flows in the common line from the left side port to the right side port in both of the manifold designs. ② The sample is injected from the front side individual port to the common line, when one of the valves are open. ③ In the conventional design, since the sample remains in the vertical flow path, CONTAMINATION...

Takasago's VENTIDUCT is an optional part which is fitted between a valve body and the solenoid. It has ducts for ventilation and heat radiation. It is used as follows. 　・With volatile and corrosive fluids 　・With fluids which are temperature sensitive 　・By users of high temperature fluids EFFECT of VENTIDUCTVentiduct provides the following protection: ・  The "VENTIDUCT" option protects the metal parts of the solenoid from any volatile corrosive gases (such as TRIFLUORO ACETIC ACID) that manage to pass through the diaphragm. It is also available with a "Backup Diaphragm" to further increase the protection provided. ・  VENTIDUCT protects the fluid from heat...

KV-2-4MFG-4 / EXV-2-12MDG If you would like to install diaphragm valves compactly and connect flow paths over a short distance, the manifold is the best choice. If you let us know the flow pattern you require, we can design and produce the product to meet your requirements. A variety of shapes, materials, and structural methods are available, and we are also capable of equipping the manifold with components like diaphragm valves, pumps, etc. Note: Details such as specifications, etc., may be changed without notice.   List of Takasago's Manifolds For more information or details, please feel free to contact us...

  Reduce environmental impact! Promote green tech with energy-saving valves! What is the "Latching Solenoid Valve"? In the case of a normally closed type of conventional solenoid valve, continuous energization is required to maintain an open state. The latching solenoid valve doesn't require a power supply for the purpose of maintaining open state through the utilization of a permanent magnet. For a more detailed explanation about the latching mechanism please feel free to see our technical guide for the Operation Principles of the Latching Mechanism. >> Jump to Product Inquiry   Benefits of using the Latching Solenoid Valve Eco-friendly and energy efficient:...

The Position-Feed-Back Shaft, projected at the top of the valve, moves up and down correspondence to the valve opening and closing. The shaft can transmit the valve's motion to a microswitch for sending a reliable feedback signal of the on-off status to the control system. Effectively, by feeding back the valve motion itself, the Position-Feed-Back Shaft enhances the reliability by constantly monitoring the valve status compared to traditional methods monitoring an electrical current sent to the valve. We highly recommend this part for reliability-oriented applications. Note: Details such as specifications, etc., may be changed without notice.   Applicable Models MTV...