Inert Diaphragm Pump with Flow Rate of 500 mL/min
- 20% higher flow than other competitive pumps of similar size, even at higher pressure ratios.
- Using a diaphragm with excellent discharge performance of gas-liquid mixed fluid. DBP pumps can be used not only for liquids but also gasses.
- No metal materials are used as wetted parts (see specifications table). Suitable for a wide variety of fluids.
- Available option to change to a longer-life motor. With this option, the pump life will be approximately 1.5 times longer. Please feel free to contact us for more information about this pump.
Note: Details such as specifications, etc. may be changed without notification.
FLOW CURVE

Note 1: Details such as specifications, etc. may be changed without notification.
Note 2: The flow curves of the competitive products are the mean values of three commercial products randomly sampled and measured by Takasago. The flow curves of our products are the mean values of ten samples. All the values are only for reference and not guaranteed.
Note 3: Flow rate varies depending on the temperature and the tubing conditions.
VIDEO OF THE DIAPHRAGM PUMP - DBP SERIES
SPECIFICATIONS
Swipe left to see the remaining contents
Model Number |
DBP-500P-N1E
|
Outer Dimensions |
31 * 55.2 * 82 mm
|
Motor |
DC Motor
|
Pump Method |
Diaphragm Pump
|
Port Connection |
Hose Barbs
|
Fluid Temperature Range |
5~80°C
|
Ambient Temperature Range |
5~40°C
|
Rated Voltage |
12 or 24 VDC
|
Power Consumption |
4 W
|
Body Material |
PP
|
Seal Material |
EPDM
|
Maximum Pumped Volume |
500 mL/min
|
Maximum Pumped Pressure |
100 kPa
|
Weight |
195 g
|
Notes |
Typical Flow Rate*1 |
500 mL/min |
Maximum Discharge Pressure |
100 kPa |
Maximum Vacuum Pressure |
-60 kPa |
Life Cycle |
1500 Hours*2 |
Note: Details such as specifications, etc. may be changed without notification.
*1: Typical flow rate is at 0 kPa backpressure.
*2: Under Takasago testing conditions.
|