Manufacturer of Valves, Pumps, and Manifolds

Miniature Diaphragm Valves | Compact Inert Valves for Medical and Analytical instrumendts. We take custom orders!

directory HOME > News Release

Welcome to Takasago Fluidic Systems, a leading manufacturer of valves, pumps and manifolds

Push-in Fitting Diaphragm Valves

Push-in Fitting Diaphragm Valves1.jpg

No separate fittings required

Just insert tubing directly


Features

- Just insert plastic tubing into the ports to connect the valve. No special preparation of the tubing is required, such as enlarging the connection end.

- For disconnection, simply pull out the tubing while pushing in the port ends (collet).

- The tubing can freely revolve even after insertion. This prevents troublesome kinking and twisting that can occur when you screw the other end of the tubing into a threaded port using a conventional fitting.

- Integral moulding eliminates the concern of leakage between the fittings and the body.

- Applicable to O.D. 2 mm PTFE/PFA tubing.

- High chemical resistance due to PPS, FPM and PTFE wetted materials. 



For more videos, please visit our Product Videos Page.



How to Connect/Disconnect Tubing



How to Connect Tubing1.png

Specifications for Standard Models

Model Number

CTV-2-P2RF-S

CTV-3-P2RF-S

Type

2-way N.C.

3-way

Orifice Diameter

1.2 mm

Tubing to Connect

O.D. 2 mm PTFE/PFA Tubing

Operating Pressure Range

-50 to 200 kPa

Fluid Temp. Range

5 to 50°C

Ambient Temp. Range

5 to 40°C

Rated Voltage

12 VDC, 24 VDC

Power Consumption

3.5 W

Duty Cycle

Continuous

Dielectric Strength

AC1500V 60 s

Wetted Materials

PPS, PTFE, FPM

PPS, PTFE, FPM, Al₂O


*Please consult with us for other applicable models.


Push-in Fitting Specifications 

Operating Pressure

700 kPa at 20°C

450 kPa at 100°C

Fluid Temp.

Max. 100°C


Cross-sectional Image
push-in fitting image.png

Dimensions

push-in fitting dimentions.png

Applicable Models

STV Series            molded_manifold_x_series.jpg

    STV Series       Molded Manifold Valves XTA-2E Series


Note: Details including specifications may change without notification.

contact


October 22, 2014 00:10 AM

New product
Development product

Calendar

October 2017


トップページへ