Manufacturer of Valves, Pumps, and Manifolds

Miniature Diaphragm Valves | Compact Inert Valves for Medical and Analytical instrumendts. We take custom orders!

directory HOME > News Release

Welcome to Takasago Fluidic Systems, a leading manufacturer of valves, pumps and manifolds

analytica 2014 & Our Proposals for Cost Saving

analytica2014_logo.jpg

Takasago will exhibit our valves and pumps at analytica 2014 (24th International Trade Fair for Laboratory Technology, Analysis, Biotechnology and analytica Conference) held from 1 to 4 April 2014 at Messe München in Germany. Our exhibits will focus on cost saving and size reduction of analytical instruments. Some highlighted products are shown below. Please come and see our proposals at our stand, Hall A1 # 505.

 

=============== Highlight of Exhibits ===============

1. Highly Inert Piezoelectric Micro Pumps, APP Series

2. Solenoid-driven Injection Valves

3. Moulded Manifold Valves, XTA-2E Series

4. Push-in Fitting Diaphragm Valves

 


1.    Highly Inert Piezoelectric Micro Pumps, APP Series

inert_piezo_e.jpg

Our piezoelectric micro pump is a small and lightweight diaphragm pump. Because only PTFE, PEEK and perfluoroelastomer are used as wetted materials, its highly inert version is compatible with aggressive chemicals and solvents. Therefore, for instance, it can replace a conventional pump used in a washing module. One of our customers achieved about 40% cost reduction by replacing their plunger type washing pump. The flow rate of our piezoelectric pump is adjustable by changing drive voltage or drive frequency.

http://www.takasago-fluidics.com/products_pump/transfer/APP/

 

A cartridge type is also available, whose wetted parts are easily exchangeable.

http://www.takasago-fluidics.com/news/2013/10/000113.html

 

2. Solenoid-driven Injection Valves

MTV-6SL-N32UF-1 低解像.jpg

This is a solenoid-driven linearly-actuating valve that realises the same functions as a motor-driven rotary valve used as a sample injector for a LC. As it is solenoid-driven, a stepper motor or a driver is not required. It is economical and easy to operate, compared to the conventional rotary valve.

http://www.takasago-fluidics.com/news/2011/10/000095.html#more

 

Demonstration Video

http://www.youtube.com/watch?v=tnLIQgWun9s

 

3. Moulded Manifold Valve XTA-2E Series

Molded_Manifold.jpg

Each block basically holds two 2-way valves and can be flexibly joined together up to 6 blocks to make the maximum of 12 stations. As the block is moulded, this product provides cost reduction at any number of stations from 3 to 12.

 

4. Push-in Fitting Diaphragm valves

one_tough_fitting_valve.jpg

Just insert plastic tubing into ports and then the valve is connected. No fitting nor special preparation of the tubing is required, such as enlarging the connection end. For disconnection, simply pull out the tubing while pushing in the port ends. It saves your assembling time.

http://www.takasago-fluidics.com/news/2014/10/000134.html 

 

In addition to the above exhibits, we will show other various products, which may contribute to your applications.

 

=============== Exhibition Outline ===============

analytica 2014 (24th International Trade Fair for Laboratory Technology, Analysis, Biotechnology and analytica Conference)

Website: http://analytica.de/en/Home

Exhibition Dates: 1 - 4 April 2014

Location: Messe München

Messegelände 81823 Munich

Our Stand: Hall A1 #505

============================================

contact

March 11, 2014 00:03 AM

New product
Development product

Calendar

December 2017


トップページへ