High-Temperature High-Pressure Solenoid Valve

Welcome to Takasago Fluidic Systems, a leading manufacturer of valves, pumps and manifolds

Up to 180°C & 800 kPa

Features of High-Temperature High-Pressure Solenoid Valve

・This solenoid diaphragm valve employs a unique mechanism to absorb the dimensional changes of the plastic body caused by temperature changes. No leakage with high temperature fluids.

・Most suitable for the case sulfuric acid is heated for COD Measurement.

・An elastomer is employed for the seal material, reducing damage to the valve seat by foreign matters in the fluid and associated leakage problem.

Specifications of High-Temperature High-Pressure Solenoid Valve

Model Number	MTV-2-M6(1/4U)GHT-20
Type	2-way Normally Closed
Orifice Diameter	1.8 mm
Port Connection	M6 or 1/4-28UNF
Operating Pressure Range	IN：0 ～ 800 kPa OUT：0 ～ 100 kPa
Fluid Temp. Range	5 ～ 180 °C
Ambient Temp. Range	5 ～ 40 °C
Rated Voltage	12 or 24 VDC
Power Consumption	7.6 W
Duty Cycle	ED=20 %, Maximum ON time: 5 min (Continuous operation possible with an optional circuit)
Insulation Class	Class H
Dielectric Strength	1500 VAC for 60 s
Wetted Materials	PFA, Perfluoroelastomer
Outer Dimensions	φ25 x 47.5 mm