Manufacturer of Valves, Pumps, and Manifolds

Miniature Diaphragm Valves | Compact Inert Valves for Medical and Analytical instrumendts. We take custom orders!

directory HOME > News Release

Welcome to Takasago Fluidic Systems, a leading manufacturer of valves, pumps and manifolds

Pen-Type Glass Syringe Pump SAP Series

sap-e.jpgFeatures of the Pen-Type Glass Syringe Pump

           Remarkably small outer dimensions of Dia. 8.8 x L 121 mm, now with a built-in stepper motor (with a reduction gear).

           With a lightweight of only 33 g, this pump is very suitable for installation on the stage of a microscope, inside an incubator, or on moving parts, etc.

           Continuous microlitre transfer system can also be made possible by operating 2 pieces of syringe pumps alternately.

           Theoretical resolution is 21 nl.

           Has a built-in sensor that enables zero-point detection.

           In addition to the needle model in the above picture, a No.6-40UNF threaded port model and a special attachment model to connect with our small 3-way valve are also available.

           A driver for operating this pump has also been prepared.

 

Specifications of the Pen-Type Glass Syringe Pump (For the needle type)

Model Number

SAP-100G-N

Syringe Capacity

100 μl

Theoretical Resolution

21 nl

Duty Cycle

10 s  ED33%

Maximum Frequency

1500 Hz

Wetted Materials

Glass (barrel), PTFE (tip), Stainless Steel (needle)

A small amount of silicone oil is applied to the tip as a lubricant.

Outer Dimensions

Dia. 8.8 × L121 mm (excluding the needle)

Needle Size

22G (φ0.4×φ0.72 L51 mm)

Weight

33 g

 

Dimensions of Pen-Type Glass Syringe Pump

Needle Type

glass_syringe_dimentions.jpg

Note:

 Details including specifications may change without notification.

 

List of the Pen-Type Syringe Pump can be seen from here.

You can contact us here for any inquiries.

February 08, 2011 00:02 AM

New product
Development product

Calendar

October 2017


トップページへ